BONDING of vulcanized rubber, plastics, ebonite, TISSUE to metals (including painted), glass, wood using cold method without subsequent vulcanization.
Examples: surface protection from corrosion and abrasion, sealing of joints, decorative trim, fixing of thermal insulation.
| Adhesive | Viscosity | Slew rate of strength | Temperature resistance of the assemblies (adhesive strength not less than 20 N/cm), °С | Maximum allowable operating temperature (short-term exposure), °С | Method of application | Open time | Characteristic features |
| Adhesive 88 CR 2402 | middle | more than middle | -50...+70 | +100 | brush, spraying | more than middle | multifunctional |
| Adhesive 88 CR 2402 L | low | more than middle | -50...+70 | +100 | spraying | more than middle | multifunctional |
| Adhesive 88 CR 2402 VL | increased | middle | -50...+70 | +100 | brush | high | multifunctional |
| Adhesive 88 spraying | low | high | -50...+80 | +120 | spraying | middle | multifunctional |
| Adhesive 88 Viscous, Possibility of gluing correction | high | middle | -50...+70 | +100 | brush | high | multifunctional |
| Adhesive 88 Viscous, Fast Fixation | high | high | -50...+90 | +125 | brush | low | multifunctional |
| Adhesive Stels | middle | high | -50...+80 | +110 | brush, spraying | middle | high adhesion |
| Adhesive Stels L | low | high | -50...+80 | +110 | spraying | middle | high adhesion |
| Adhesive Stels K | middle | high | -50...+80 | +110 | brush | middle | high adhesion |
| Adhesive Nairit Т 3403 | middle | high | -50...+95 | +125 | brush, spraying | low | high adhesion |
| Adhesive Nairit CR 3301 | high | high | -50...+70 | +100 | brush | high | high adhesion to porous materials |
| Adhesive Nairit CR 3307 | high | high | -50...+95 | +125 | brush | low | high adhesion to porous materials |
| Adhesive Nairit Т CR3405 | middle | high | -50...+120 | +150 | brush, spraying | middle | Very high heat resistance. High adhesion |
BONDING of vulcanized rubber, plastics, ebonite, fabric to metals (including painted), glass, wood using cold method with subsequent cold vulcanization.
Examples: surface protection from corrosion and abrasion, sealing of joints, decorative trim.
| Adhesive | Viscosity | Slew rate of strength | Temperature resistance of the assemblies (adhesive strength not less than 20 N/cm), °С | Maximum allowable operating temperature (short-term exposure), °С | Method of application | Open time | Characteristic features |
| Adhesive 88 CR 2402 D/1 | low | more than middle | -50...+120 | +150 | spraying | more than middle | multifunctional |
| Adhesive 88 CR 2402 D/2 | middle | more than middle | -50...+120 | +150 | brush, spraying | more than middle | multifunctional |
| Adhesive 88 CR 2402 D/3 | increased | more than middle | -50...+120 | +150 | brush | more than middle | multifunctional |
| Adhesive Nairit CR 3301 D | high | high | -50...+120 | +150 | brush | high | high adhesion to porous materials |
| Adhesive Nairit CR 1301 D | middle | high | -50...+100 | +130 | brush, spraying | high | multifunctional |
