Not published yet

FOUNDATIONS ROOFS AND POOLS

Bonding of sheet, roll, membrane (EPDM), tiled insulated materials to concrete, brick, stucco surfaces, metal (including colored), wood in a cold way.

For example: waterproofing of underground structures and foundations, surface protection against corrosion and abrasion, sealing of joints, waterproofing of roofs, tanks and pools.

Adhesive Viscosity Slew rate of strength Temperature resistance of the assemblies (adhesive strength not less than 20 N/cm), °С Maximum allowable operating temperature (short-term exposure), °С Method of application Open time Characteristic features
Adhesive 88 CR 2402 middle more than middle -50...+70 +100 brush, spraying more than middle multifunctional
Adhesive 88 CR 2402 L low more than middle -50...+70 +100 spraying more than middle multifunctional
Adhesive 88 CR 2402 VL increased middle -50...+70 +100 brush high multifunctional
Adhesive 88 spraying low high -50...+80 +120 spraying middle multifunctional
Adhesive 88 Viscous, Possibility of gluing correction high middle -50...+70 +100 brush high multifunctional
Adhesive 88 Viscous, Fast Fixation high high -50...+90 +125 brush low multifunctional
Adhesive Stels middle high -50...+80 +110 brush, spraying middle high adhesion
Adhesive Stels L low high -50...+80 +110 spraying middle high adhesion
Adhesive Stels K middle high -50...+80 +110 brush middle high adhesion
Adhesive Nairit CR 3307 high high -50...+95 +125 brush low Elements of complex profile
Adhesive Nairit Т 3403 middle high -50...+95 +125 brush, spraying low Elements of complex profile
Adhesive PU 303 high high -50...+90 +110 spraying low thermoactivation 60°С

CORK, BAMBOO, VENEERS

Bonding of cork, bamboo coverings, wood veneers to concrete, stucco surfaces, wood, wood chipboard, MDF, plywood.

Examples: bamboo and cork wallpaper, cork floor, bonding veneer to wood, chipboard, MDF, metal.

Adhesive Viscosity Slew rate of strength Temperature resistance of the assemblies (adhesive strength not less than 20 N/cm), °С Maximum allowable operating temperature (short-term exposure), °С Method of application Open time Characteristic features
Adhesive Nairit CR 3301 high high -50...+70 +100 brush high multifunctional

THERMAL INSULATION

Bonding of sheet, roll, knotted mineral thermal insulatied materials to metal (including colored), concrete, brick, stucco surfaces, wood in a cold way.

Adhesive Viscosity Slew rate of strength Temperature resistance of the assemblies (adhesive strength not less than 20 N/cm), °С Maximum allowable operating temperature (short-term exposure), °С Method of application Open time Characteristic features
Adhesive 88 CR 2402 middle more than middle -50...+70 +100 brush, spraying more than middle multifunctional
Adhesive 88 CR 2402 L low more than middle -50...+70 +100 spraying more than middle multifunctional
Adhesive 88 CR 2402 VL increased middle -50...+70 +100 brush high multifunctional
Adhesive 88 spraying low high -50...+80 +120 spraying middle multifunctional
Adhesive 88 Viscous, Possibility of gluing correction high middle -50...+70 +100 brush high multifunctional
Adhesive 88 Viscous, Fast Fixation high high -50...+90 +125 brush low multifunctional
Adhesive Stels middle high -50...+80 +110 brush, spraying middle high adhesion
Adhesive Stels L low high -50...+80 +110 spraying middle high adhesion
Adhesive Stels K middle high -50...+80 +110 brush middle high adhesion
Adhesive Nairit Т 3403 middle high -50...+95 +125 brush, spraying low Increased initial strength
Adhesive Nairit Т CR3405 middle high -50...+120 +150 brush, spraying middle Very high heat resistance. High adhesion
Adhesive PU 303 high high -50...+90 +110 spraying low thermoactivation 60°С

Bonding of all kinds of heat insulatied materials to metals (including colored), PVC panels.

Adhesive Viscosity Slew rate of strength Temperature resistance of the assemblies (adhesive strength not less than 20 N/cm), °С Maximum allowable operating temperature (short-term exposure), °С Method of application Open time Characteristic features
Adhesive Cross E102 middle low -80...+150 +180 brush, spraying middle solvent, no shrinkage

DECORATIVE ELEMENTS AND COATINGS

Bonding of sheet, roll, tiled decorative and protective materials and elements to concrete, brick, stucco surfaces, metal (including colored), wood in a cold way.

Examples: decor elements, baseboards, jamb, decorative trim, fixing of thermal insulation.

Adhesive Viscosity Slew rate of strength Temperature resistance of the assemblies (adhesive strength not less than 20 N/cm), °С Maximum allowable operating temperature (short-term exposure), °С Method of application Open time Characteristic features
Adhesive 88 CR 2402 middle more than middle -50...+70 +100 brush, spraying more than middle multifunctional
Adhesive 88 CR 2402 L low more than middle -50...+70 +100 spraying more than middle multifunctional
Adhesive 88 CR 2402 VL increased middle -50...+70 +100 brush high multifunctional
Adhesive 88 spraying low high -50...+80 +120 spraying middle multifunctional
Adhesive 88 Viscous, Possibility of gluing correction high middle -50...+70 +100 brush high multifunctional
Adhesive 88 Viscous, Fast Fixation high high -50...+90 +125 brush low multifunctional
Adhesive Stels middle high -50...+80 +110 brush, spraying middle high adhesion
Adhesive Stels L low high -50...+80 +110 spraying middle high adhesion
Adhesive Stels K middle high -50...+80 +110 brush middle high adhesion
Adhesive Nairit Т 3403 middle high -50...+95 +125 brush, spraying low Increased initial strength
Adhesive Nairit Т CR3405 middle high -50...+120 +150 brush, spraying middle Very high heat resistance. High adhesion
Adhesive PU 303 high high -50...+90 +110 spraying low thermoactivation 60°С