Not published yet

Bonding of bottom of footwear made of leather, rubber, polyurethane, PVC, TPE To uppers of leather and fabric.

Adhesive Viscosity Slew rate of strength Temperature resistance of the assemblies (adhesive strength not less than 20 N/cm), °С Maximum allowable operating temperature (short-term exposure), °С Method of application Open time Characteristic features
Adhesive PU 314 middle high -50...+80 +110 brush, spraying low thermoactivation 60°С
Adhesive PU 312 high high -50...+80 +110 brush low thermoactivation 60°С
Adhesive PU 301 low   -50...+80 +110 brush, spraying   primer
Adhesive PU 312D high high -50...+110 +140 brush low increased heat resistance
Adhesive PU 410 high middle -50...+80 +110 brush low thermoactivation 45°С
Adhesive Cross E203 high middle -50...+100 +130 brush, spraying middle Do not require thermal activation

Bonding of bottom of footwear made of leather, SHEET and cellular rubber To uppers of leather and fabric.

Adhesive Viscosity Slew rate of strength Temperature resistance of the assemblies (adhesive strength not less than 20 N/cm), °С Maximum allowable operating temperature (short-term exposure), °С Method of application Open time Characteristic features
Adhesive Nairit CR 3307 high high -50...+95 +125 brush low High adhesion to porous materials
Adhesive Nairit T 3403 middle high -50...+95 +125 brush, spraying low High adhesion to non-porous materials
Adhesive Nairit CR 3301 high high -50...+70 +100 brush large High adhesion to porous materials

Bonding of bottom of EVA to uppers

Adhesive Viscosity Slew rate of strength Temperature resistance of the assemblies (adhesive strength not less than 20 N/cm), °С Maximum allowable operating temperature (short-term exposure), °С Method of application Open time Characteristic features
Adhesive Nairit Т CR3405 middle high -50...+120 +150 brush, spraying middle Good adhesion to EVA Elastomers

Inner assembly

Adhesive Viscosity Slew rate of strength Temperature resistance of the assemblies (adhesive strength not less than 20 N/cm), °С Maximum allowable operating temperature (short-term exposure), °С Method of application Open time Characteristic features
Adhesive Nairit CR 3307 high high -50...+95 +125 brush low High adhesion to porous materials
Adhesive Nairit T 3403 middle high -50...+95 +125 brush, spraying low High adhesion to non-porous materials

ASSEMBLY of footwear, haberdashery

Adhesive Viscosity Slew rate of strength Temperature resistance of the assemblies (adhesive strength not less than 20 N/cm), °С Maximum allowable operating temperature (short-term exposure), °С Method of application Open time Characteristic features
Rubber Adhesive NR 103 very high low -50...+60 +90 brush very large Adhesive for assembly
Adhesive Nairit CR 2302 high high -50...+70 +100 brush large Adhesive for assembly